class="product-template-default single single-product postid-2793 woocommerce woocommerce-page three-columns product-page unknown">

ACS Composite Rear Diffuser / Valance Fins ABS Plastic Injection for C7 Corvette Stingray Grand Sport and Z06 (Two (2) Per Tunnel (4 total), Carbon Flash Metallic Black (Matches Rear Diffuser))

By: admin
  • 348
  • 0
  • 0

After relentless investigation and consumer demand, ACS developed an additional fin system that improves upon our previous creation of the single fin system. Now a 2×2 fin system, the added fin on each tunnel of the C7 adds some serious kick-ass attitude to the vehicle's derriere. Of course, as with all our components, these visually stimulating additions will do more for your Corvette than just aesthetics. Our diffuser fins will help to: Stimulate airflow in the integrated diffuser by redirecting the rear airflow in a linear direction, helping to improve airflow in the undercarriage. Boost the vehicle's aerodynamics as a result of a reduction in turbulent air at the rear end. The diffusers act to direct fast-moving air away from the undercarriage as it decelerates and expands. ‘High performance design' is not synonymous with perfect design and each ACS addition is constructed with the intention of making subtle tweaks that drive your vehicle closer to the edge of design perfection. The facts: ACS-C7 Stingray Corvette diffuser dual Fins Designed for all Stingray C7s, coupes, convertibles, Z06 & Grand Sport. Complements existing OEM diffuser. Manufactured in highest quality ABS composite material. Same material as the diffuser already on your car. Available in Carbon Flash Black finish to match your car's diffuser or Unpainted to be custom detailed to match your car's color. Simple installation (with supplied templates) using 3 SEM bolts each side. 25 minute per side installation time. Application Guide: C7 Corvette Z06 C7 Grand Sport C7 Stingray
FITS ALL C7s: The perfect add-on to the rear diffuser of your C7 Stingray, Z51, Grand Sport or Z06!
EASY INSTALLATION: A quick add-on modification that can completed in under an hour. Installation involves drilling (3) holes per fin. Template is included to guide you through the process as well as the necessary hardware. Securing the fins with bolts is optimal for performance.
PRECISION MANUFACTURING: Made in ABS-PC plastic injection molding. This means each item is perfectly crafted each time and no defective manufacturing can occur in the process.
OPTIONAL CARBON FLASH PAINT: Painted in a carbon flash metallic black to match the trim pieces found on the C7 including the rear diffuser, hood and fender inserts.
IMPROVED AERODYNAMICS: The addition of fins on the diffuser enables the air that passes underneath to flow unilaterally. This is optimal for airflow management has consistency is important for enhancing aerodynamics.

Your comment added

Write a comment

There are no reviews yet.